You can select any timber in any design of door.

These shown are examples only.

SOLID TIMBER DOOR PROFILES – SOLID BEAUTY RANGE

The very traditional range of solid timber doors.
All doors are supplied raw unless specified to be polished

Tas Oak FTD1
Square/Square Edges

• Internally moulded
• Raised solid plaque

Blackwood FTD1
Arch/Pencil Round Edges
American Rock Maple FTD2
Square/Small Edge Mould

• Internally moulded
• Raised solid plaque
• Half round mould

Sapele FTD2
Arch/Large Edge Mould
American Cherry FTD4
Square/Square Edges

• Internally moulded
• Solid with a groove in plaque

SOLID TIMBER DOOR PROFILES

American White Ash FTD3
Square/Small Edge Mould

• Internally moulded
• Raised solid plaque
• Nuveau moul

Blackwood NFG FTD3
Arch/Stepped Pencil

NFG Messmate FTD14
Square/Square Edges

• Internally moulded
• Raised solid plaque
• Country life

Tas Oak FTD14
Arch/Pencil Round Edges

SOLID TIMBER DOOR PROFILES

Tas Myrtle FTD16
Square/Square Edges

• Internal square edged frame
• Solid flush panel

Blackwood FTD18
Square/Pencil Round Edges

• Solid frame with a solid flush insert panel

Note: We do not take any GUARANTEE for any
movement that may occur with this particular design of door.

American Walnut FTD19
Square/Square Edges

• Internally moulded
• Sharp raised solid plaque
• Modern profile
• DGI styles & rails or our standard styles & rails
• Square or Arch

American Walnut FTD19
Arch/Square Edges
Red Gum Select FTD20
Square/Square Edges

• Internally moulded
• Sharp raised solid plaque
• Modern profile

Red Gum Select FTD20
Arch/Square Edges
Tas Oak FTD21
Square/Davo Mould – Square Edges

• Internally moulded
• Raised solid plaque
• Similar to FTD 1 plaque (smaller mould)
• Davo styles & rails

Tas Oak FTD21
Arch/Square Edges

VENEER TIMBER DOOR PROFILES – MODERN SIMPLICITY

Sleek and Stylish range of timber veneer doors.
All doors are supplied RAW unless specified to be polished.

Danta FTD6
Square/Square Edges

• Internally moulded with 5.5mm ply plaque

Danta FTD6
Arch/Square Edges
Jarrah FTD7
Square/Square Edges

• Internal square edged frame with 5.5mm ply plaque

Jarrah FTD7
Arch/Square Edges

• Internal square edged frame with 5.5mm ply plaque

Tas Myrtle FTD13
Square/Square Edges

• Internal large bevel edged frame with 5.5mm ply plaque
• Rounded or square edges

Tas Myrtle FTD13
Arch/Square Edges

• Internal large bevel edged frame with 5.5mm ply plaque
• Rounded or square edges

New Guinea Rosewood FTD15
Square/Square Edges

• Internal small bevel edged frame with 5.5mm ply panel

New Guinea Rosewood FTD15
Arch/Square Edges
Silky Oak FTD17
Square/Square Edges

• Internal small pencil round frame with 5.5mm ply plaque

Silky Oak FTD17
Arch/Square Edges

VENEER WITH BOLECTION MOULD TIMBER DOOR PROFILES ~ VISUALLY INSPIRING

Jarrah FTD8
Square/Square Edges

• Internal square edged frame with
5.5mm ply panel & 22mm bolection mould

Tas Oak FTD5
Square/Square Edges

• Internal davo styles & rails edged frame with
5.5mm ply plaque & 22mm
bolection mould on face of frame

Tas Oak FTD22
Square/Square Edges

• Internal square edged frame with 5.5mm ply
plaque & farmhouse bolection mould
• Top and bottom rails: 85mm
• Styles: Standard 63mm

LINING BOARD TIMBER DOOR PROFILES ~ UNIQUE AND DESIRABLE

The country design of doors provide a long lasting impression.
All doors are supplied raw unless specified to be polished.

Baltic Pine FTD11
Square/Square Edges – Regency

• Internal square edged frame with 22mm
bolection mould
• Regency or V-Groove

Blackwood FTD9
Square/Square Edges – V-Groove

• Internally moulded (small mould) with lining board, Regency or V-Groove

Blackwood FTD9
Arch/Square Edges – V-Groove
Tas Oak FTD10
Square/Square Edges – V-Groove

• Internally moulded with lining board
• Regency or V-Groove

Western Red Cedar FTD10
Arch/Stepped Pencil – Regency

FRAME ONLY DOORS

Available in most profiles.

COLONIAL BAR DOORS

Blackwood FTD12
Square/Square Edges – Four Section Door

• Colonial Bars
• Square or Arch: Rebate = 13mm
• Available in sections: 4, 6 or 8
• Bolection Mould Doors FTD8, FTD11 and FTD22
will be made as the above Colonial Bar Mould.